Sr.No. | Name | PUI 2000 |
1 | General | |
1.Maximum distance between center | 2000mm | |
2.Maximum diameter of swing | mm | |
3.Minimum grinding diameter | mm | |
2 | Table | |
1. HYD Infinitely Varible Range of table feeds / min. | 0.5/1.5 mm/mm | |
2. Maximum swivel of table | 6°+2°=8° deg | |
3. Electric motor 3 phase/ 14440 rpm 440 /440 V | 0.37 / 0.5 K.W./H.P. | |
3 | Wheel Head | |
1. Grinding wheel (D x W x B) | 360mm x 38.1mm x 127mm | |
2. Worn ot diametr | 275mm | |
3. Grinding wheel spindle rpm | 1800mm | |
4 | Swivel of Wheel Head | |
1. Towards work head & tail stock | 60°-45° deg. | |
2. Electric motor 3 phase/1440 rpm 400/440 V | 2.2/3 K.W./H.P. | |
3. Maximum tra verse movement | 150mm | |
4. Infeed per one division of hand wheel/division | 0.01mm | |
5 | Work Head | |
1. Number of spindle speed | 4 | |
2. Range of spindle speed | 60/125/175/300 rpm | |
3. Morse taper in spindle | 4MT | |
4. Work head swivel | 90° deg. | |
5. Electric motor 3 phase/1440 rpm 400/440 V | 0.37/0.15 K.W./H.P | |
6. Coolant pump motor 3 phase 2860 rpm/400-440 V | 0.11/0.15 K.W./H.P. | |
6 | Tail Stock | |
1. Morse Taper in spindle | 4MT | |
2. Quill travel | 25mm | |
7 | Weight and Dimension | |
1. Weight (Approximate) | 4000Kg | |
2. Length | 2900mm | |
3. Width | 1300mm | |
4. Height | 1550mm | |
All weights & dimensions are approximate and are not binding as constantly improving designs. | ||
*Extra equipment at extra cost |
PITRODA UTILITY INDUSTRIES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |